HOME PAGETARMACBLOCK PAVINGRESIN BONDED PAVINGRESIN BOUND PAVINGPICTURE GALLERYAREAS WE COVERCONTACT US
 
28 Years of Trading      
   
  GROUND WORK • DRAINAGE • TARMACADAM • ASHPHALT • RESIN BONDED & BOUND PAVING
 
   
 
Resin Bound Paving
   
 

Driveway is made up of an excavation of approx 250mm deep. A sub base of granular stone (MOT Type 1) is laid to a depth of approx 150mm and consolidated with a vibrating roller.

A tarmacadam base is laid on to the stone, usually at a depth of 50/60mm and then consolidated.
The chosen colour resin mix is then laid to an approx depth of 15/18mm and troweled flat for a smooth finish.

All depths are dependant on the use of the drive and footpaths.

*Some form of edging should always be used as a retainer for the materials*

   
 
This is a job laid in Beaconsfield using sierra yellow and dovedale cream mixed together.
   
   
   
This is a job in Enfield, where the customer started off with resin bonded aggregate and converted to resin bound using a 6mm Harvest Buff.
   
   
  This is a job in Potters Bar. The customer chose a 6mm Autumn Tan. The pictures below show the tarmacadam base before the mix is applied and then the finished result.
   
 

 
 
     
 
HOME l TARMAC l BLOCK PAVING l RESIN BONDED PAVING l RESIN BOUND PAVING l GALLERY l AREAS WE COVER l CONTACT US
 
     
 
Arc Surfacing Limited - Registered company No. 4709507
Tel: 01707 874 495 - Mob: 07831 301 948 - Fax: 01707 876 033